parallax background

 

“It is our priority to be compliant from an environmental, health & safety, and regulatory perspective.”


Call 1.855.618.4646 to request your quote today!

 


Roll it Booths are designed and engineered to meet industry standards


  • EPA 40CFR – Part 63.11173 Spray Finishing Requirements
  • NFPA 17 Dry Chemical Extinguishing Systems
  • NFPA 33 Spray Application
  • NFPA 91 Standard for Exhaust Systems for Conveying Vapors, Gases, etc.
  • NFPA 101 Life Safety Code
  • NFPA 259 Standard Test Method for Potential Heat of Building Material
  • NFPA 701 Fabric – Flame R0esistance – Fabric
  • OSHA 29CFR – 1910.107 Spray Finishing
  • OSHA 29CFR – 1910.94 Ventilation
  • ONTARIO OHSA O.Reg 213 – 5.12 Fire Code – Spray Operation
  • ONTARIO OHSA O.Reg 851 – 63 Ignition or Explosive
  • ONTARIO OHSA O.Reg 851 – 65 Dust – Ignition or Explosion
  • Electrical CSA/UL, ETL and UL Listed
  • Exhaust Fan meets AMCA testing requirement and bears AMCA Seal

  • For basic spray painting you may need to provide;


  • An exhaust plenum
  • Exhaust ducting
  • A control panel
  • Electrical wiring and connections
  • You may be required to install a fire suppression in your spray enclosure. (as per NFPA 33)
  • Sufficient make-up air since the retractable spray enclosure will produce negative pressure in the shop.